FNM Filter Testers (FT150PA, FT200PO and FT200PS) can determine the efficiency, pressure drop and air permeability of different flat sheet filter media/respiratory mask using oil, salt aerosols or atmospheric dust. Our filter/respiratory mask testers can be employed for testing different flat sheet media which are used for producing respiratory face masks and air filters.
Filter/respiratory mask testers are equipped with high precision particle counter (six-channel particle sizes: 0.3, 0.5, 1.0, 2.5, 5.0 and 10.0 µm) for counting the particles generated by oil / salt particle generator or atmospheric dust in order to calculate filtration efficiency. Additionally, this machine can calculate air permeability and pressure drop of flat sheet media automatically. FT200PO and FT200PS use two particle counters that simultaneously count upstream and downstream particles. Data can be saved automatically and also test reports can be printed by an installed printer on the machine. FNM filter/respiratory mask testers can measure the efficiency and pressure drop of flat sheet media according to BS EN 143, BS EN 149, BS EN 779, ISO 16890, ISO 16900-3, ISO 11155-1 and ISO 5011 standards.
FT150EA
FT200PO
FT200PS
Test Modes
Pressure drop test
✔
Air permeability test
Filtration efficiency test
Atmospheric
Oil Particles
Oil and Salt Particles
Bubble point
✘
Optional
Standards
BS EN 149
BS EN 779
ISO 16890
ISO 16900-3
ISO 11155-1
ISO 5011
Control
PLC
HMI
7”
Ambient Temp.
Air flow
Flow
10 - 150 l/min
10 - 200 l/min
Digital control
Media Holder
Area
100 cm2
20, 50 and 100 cm2
Sensors
Temperature
Relative humidity
Digital tank pressure control
Air Compressor
Tank pressure
1 – 8 bar
Pressure Drop
Pressure drop
0 – 1200 Pa
Air Dryer
Air line trap
Dryer system
Particle Counter
Laser particle counter
1
2
Channels
six-channel
Channel sizes
0.3, 0.5, 1, 2.5, 5, 10 μm
Flow rate
2.8 L/min
Aerosol Generator (Oil)
Generator
Aerosol Generator (Salt)
Neutralizer
Aerosol Dilutor
Particle dilution
100:1
Type of aerosol challenge
PSL, PAO, DOP
PSL, PAO, DOP, NaCl
Printer
Respiratory Face Mask Holder
Power Supply
Single phase, 220 V, AC
Weight
About 170 kg
About 180 kg
Size (cm) (Length × Width × Height)
94×92×163